Cisco Systems 5000 Manual De Usuario
S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m .
2-5
Cisco Nexus 5500 Platform and Cisco Nexus 5000 Platform Hardware Installation Guide
OL-15902-02
Chapter 2 Installing the Cisco Nexus 5000 Series Switches
Installing the Switch
•
Invoice number of shipper (see packing slip)
•
Model and serial number of the damaged unit
•
Description of damage
•
Effect of damage on the installation
Installing the Switch
This section includes the following topics:
•
•
•
•
Installing a Cisco Nexus 5596 Switch
This section describes how to use the rack-mount kit provided with the switch to install the Cisco Nexus
5596UP switch or Cisco Nexus 5596T into a cabinet or rack that meets the requirements described in
5596UP switch or Cisco Nexus 5596T into a cabinet or rack that meets the requirements described in
Note
The Cisco Nexus 5596 has front to back airflow so you must position it with the front facing a cold isle.
Caution
If the rack is on wheels, ensure that the brakes are engaged or that the rack is otherwise stabilized.
Note
You must supply the eight 10-32 or 12-24 screws required to mount the rack brackets and slider rails to
the rack. The rack-mount kit does not provide these screws.
the rack. The rack-mount kit does not provide these screws.
Table 2-1
Cisco Nexus 5596Switch Rack-Mount Kit
Quantity
Part Description
2
Rack-mount brackets
16
M4x0.7 x 8-mm Phillips countersunk screws
2
Rack-mount guides
2
Slider rails
(22 inch minimum to a 36 inch maximum)
(22 inch minimum to a 36 inch maximum)