Cisco Systems N7KF248XT25E Manual De Usuario
C H A P T E R
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
1-1
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-18634-01
1
Overview
This chapter provides an overview of the Cisco Nexus 7000 Series device and includes the following
sections:
sections:
•
•
•
•
•
Cisco Nexus 7000 Series
The Cisco Nexus 7000 Series systems are multiprotocol-capable, high-density, and high-performance
devices that incorporate Ethernet/IP, virtualization, Layer 4 to Layer 7 services, and low-latency
interconnect (LLI) technologies. The Cisco Nexus 7000 Series models are described in the following
subsections:
devices that incorporate Ethernet/IP, virtualization, Layer 4 to Layer 7 services, and low-latency
interconnect (LLI) technologies. The Cisco Nexus 7000 Series models are described in the following
subsections:
•
•
Cisco Nexus 7010 System
The Cisco Nexus 7010 chassis has 10 slots that allow for two supervisor modules and up to eight I/O
modules. The chassis also holds up to five fabric modules, two system fan trays, two fabric fan trays, up
to three power supply units, and a cable management system. The chassis also has a mounting bracket
and four positioning handles (two on each side) that you use to install the chassis after you position it
on a rack. Optionally, you can include an air filter and mid-frame doors.
modules. The chassis also holds up to five fabric modules, two system fan trays, two fabric fan trays, up
to three power supply units, and a cable management system. The chassis also has a mounting bracket
and four positioning handles (two on each side) that you use to install the chassis after you position it
on a rack. Optionally, you can include an air filter and mid-frame doors.
identifies the standard features on the front and sides of the Cisco Nexus 7010 chassis,
identifies the optional features on the front side of the chassis, and
identifies the
standard features on the rear of the chassis.