Cisco Systems 2980G Manual De Usuario
Chapter 1 Product Overview
Switch Components
1-8
Catalyst 2984G, 2948G-GE-TX, and 2980G Switch Hardware Installation Guide
78-6286-05
•
•
Management Ports
The Catalyst 2948G, 2948G-GE-TX, and 2980G switches have two kinds of
management ports: console serial and Ethernet. The Catalyst 2948G switches
have a 10BASE-T management port. The Catalyst 2948G-GE-TX and 2980G-A
switches have a 10/100BASE-T management port.
management ports: console serial and Ethernet. The Catalyst 2948G switches
have a 10BASE-T management port. The Catalyst 2948G-GE-TX and 2980G-A
switches have a 10/100BASE-T management port.
lists the management options for the switches.
Console Serial Port
An RJ-45 console serial port allows you to perform switch-management functions
using a terminal. See
using a terminal. See
for the console connector pinouts.
10BASE-T and 10/100BASE-T Ports
An RJ-45 10BASE-T port allows you to perform TCP/IP switch-management
functions (Telnet, SNMP, FTP), configure IP addresses with BOOTP, and
download software images.
functions (Telnet, SNMP, FTP), configure IP addresses with BOOTP, and
download software images.
Note
The Catalyst 2948G-GE-TX and 2980G-A switches have a 10/100BASE-T
management port.
management port.
This port is for network management only; it is not for switching. Connectivity is
not available between this port and the 10/100BASE-T switching ports.
not available between this port and the 10/100BASE-T switching ports.
Front Panel LEDs
The LEDs on the front panels of the Catalyst 2948G, 2948G-GE-TX, and 2980G
switches perform the following functions:
switches perform the following functions:
•
STATUS LEDs indicate the operating state of the switches.
•
Link Status LEDs provide management and indicate switching port status.