Cisco Systems 2984G Manual De Usuario
3-9
Catalyst 2984G, 2948G-GE-TX, and 2980G Switch Hardware Installation Guide
78-6286-05
Chapter 3 Installing the Switch
Installing the Catalyst 2948G-GE-TX Switch
Figure 3-2
Installing the Switch in the Rack
Installing the Catalyst 2948G-GE-TX Switch
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you
must take special precautions to ensure that the system remains stable. The
following guidelines are provided to ensure your safety:
must take special precautions to ensure that the system remains stable. The
following guidelines are provided to ensure your safety:
•
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
•
When mounting this unit in a partially filled rack, load the rack from the bottom to the
top with the heaviest component at the bottom of the rack.
top with the heaviest component at the bottom of the rack.
•
If the rack is provided with stabilizing devices, install the stabilizers before mounting
or servicing the unit in the rack.
or servicing the unit in the rack.
Statement 1006
98436
CONSOLE
1000Base - X
10BaseT
STATUS
Catalyst 2948G
17.75 inches (45.09 cm)
17.75 inches (45.09 cm)
17.75 inches (45.09 cm)