Cisco Systems 9124E Manual De Usuario
Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem
21
Checking LEDs
to locate power-on LEDs.
Figure 6
Verifying power-on LEDs
Verify that the LEDs match the indicators described in
Table 7
Power-on LEDs
Setting the IP address
Obtain the following items to set the IP address via a serial connection:
•
Computer with a terminal application (such as HyperTerminal in a Windows environment or
TERM in a UNIX environment
•
Null modem serial cable
Set the IP address:
1.
Verify that the enclosure is powered on.
2.
Identify the active OA in the BladeSystem.
3.
Connect a Null modem serial cable from your computer to the serial port of the active OA.
4.
Configure the terminal application as follows:
• In a Windows environment:
• In a Windows environment:
• Baud rate—9600 bits per second
• 8 data bits
• None (No parity)
• 1 stop bit
• No flow control
• 8 data bits
• None (No parity)
• 1 stop bit
• No flow control
Item
Description
Indicators
1
UID LED
- used to help user locate a specific
module in the BladeSystem for replacement,
etc.
Off
2
Health ID LED
Steady green light
:
!
EXT 1
EXT 2
EXT 3
EXT 4
1
2
181738