Cisco Systems 9124E Manual De Usuario

Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem

55

Environmental requirements

To ensure proper operation, the switch must not be subjected to environmental conditions beyond 

those for which it was tested. The ranges specified in Table 16 list the acceptable environment for 

both operating and non-operating conditions.

Table 15

Environmental requirements

Supported SFPs

Do not use unsupported SFPs; they can affect switch operability. They may not fit correctlyand may 

void your warranty. See Optional hardware kits for a list of supported SFPs.
For a complete list of supported devices, refer to the latest version of the HP StorageWorks SAN 

design reference guide:

Supported HBAs

For a list of HBAs that have been tested and are known to work with the SAN switches, refer to the 

latest version of the HP StorageWorks SAN design reference guide:

http://h18000.www1.hp.com/products/storageworks/san/documentation.htm

Condition

Acceptable range during operation

Acceptable range during non-operation

Ambient temperature

104°F/40 °C at sea level, derated 

1 C per 1000 ft above sea level

 -40°C to 70°C with maximum rate 

of change of 20 C /hr

Humidity

5% to 90% relative humidity, 

non-condensing

50% to 80% relative humidity, 

non-condensing

Altitude

0 to 10,000 ft (3 km) above sea 

level

0 to 40,000 ft (12 km) above sea 

level

Shock

40 G, 2mS duration

140 G, 2mS duration

Vibration

0.5 G, 10 to 500 Hz

 2.0 G, 5 to 500 Hz

Airflow

47 cubic ft per minute

None required