Cisco Systems 6500-E Manual De Usuario

For information on the supervisor engine LEDs, see the Catalyst 6500 Series Switch Supervisor Engine 
Guide at this URL:

Off

The module is waiting for the supervisor engine to provide power.

The module is not online.

The module is not receiving power, which could be caused by the following:

Power is not available to the module.

Module temperature is over the limit

1

.

1.

Enter the show environment temperature mod command to display the temperature of each of the four sensors on the 
module.

Red

The module is released from reset by the supervisor engine and is booting.

If the boot code fails to execute, the LED stays red after power up.

Orange

The module is initializing hardware or communicating with the supervisor 
engine.

A fault occurred during the initialization sequence.

If the module fails to download its Field Programmable Gate Arrays (FPGAs) 
on startup, it continues initializing and is granted module online status from 
the supervisor engine, but the LED stays orange.

If the module is not granted module online status from the supervisor engine, 
the LED stays orange. This problem could be caused by the supervisor engine 
detecting a failure in an external loopback test that it issued to the module.

Green

The module is operational; the supervisor engine has granted module online 
status.

ST

AT

US

WS-SVC-CMM

0

WS-SVC-CMM-6E1

WS-SVC-CMM-6E1

1

2

3

4

5

Communication Media Module

REAR MDL

ST

AT

US

68447

6-Port E1 Interface Port Adapter.

6-Port E1 Interface Port Adapter.

REAR MODULE STATUS LED

STATUS LED

Interface Module slots

0

1

2

3

4

5