Cisco Systems 3560 Manual De Usuario

energywise domain domain-name secret [0 | 7] 
password [protocol udp port udp-port-number 
[interface interface-id | ip ip-address]]

Enable EnergyWise on the entity, assign the entity to a domain 
with the specified domain-name, and set the password for secure 
communication among the entities in the domain.

(Optional) 0—Use an unencrypted password. This is the 
default.

(Optional) 7—Use a hidden password.

If you do not enter 0 or 7, the entity uses the default value of 
0.

(Optional) port udp-port-number—Specify the UDP port 
that sends and receives queries.

The range is from 1 to 65000. 

The default is 43440.

(Optional) interface interface-id—Specify the port that 
sends EnergyWise messages.

(Optional) ip ip-address—Specify the IP address of the port 
that sends EnergyWise messages.

For the domain-name and password, 

You can enter alphanumeric characters and symbols such as 
#, (, %, !, or &. 

Do not use an asterisk (*) or a blank space between the 
characters and symbols. 

By default, no domain and password are assigned.

interface interface-id

Specify the port or a range of ports to be configured, and enter 
interface configuration mode.

energywise level 10 recurrence importance 
importance at minute hour day_of_month month 
day_of_week

(Optional) Schedule the power-on recurrence.

importance importance—Set the importance of the port in 
the domain. The range is from 1 to 100. The default is 1.

minute—The range is from 0 to 59. Use * for the wildcard.

hour—The range is from 0 to 23. Use * for the wildcard.

day_of_month—The range is from 1 to 31. Use * for the 
wildcard.

month—The range is from 1 (January) to 12 (December). Use 
* for the wildcard.

day_of_week—The range is from 0 (Sunday) to 6 (Saturday). 
Use * for the wildcard.

The specified time is the local time based on the 
PoE-entity time zone.