Cisco Systems 3560 Manual De Usuario

Support for the SSM PIM protocol to optimize multicast applications, such as video

Source Specific Multicast (SSM) mapping for multicast applications provides a mapping of source 
to group, allowing listeners to connect to multicast sources dynamically and reduces dependencies 
on the application

Support for Enhanced Interior Gateway Routing Protocol (EIGRP) IPv6 to utilize IPv6 transport, 
communicate with IPv6 peers, and advertise IPv6 routes

Support for these IP services, making them VRF aware so that they can operate on multiple routing 
instances: HSRP, GLBP, uRPF, ARP, SNMP, IP SLA, TFTP, FTP, syslog, traceroute, and ping 

Configuration logging to log and to view changes to the switch configuration

Unique device identifier to provide product identification information through a show inventory 
user EXEC command display

In-band management access through the device manager over a Netscape Navigator or Microsoft 
Internet Explorer browser session

In-band management access for up to 16 simultaneous Telnet connections for multiple CLI-based 
sessions over the network

In-band management access for up to five simultaneous, encrypted Secure Shell (SSH) connections 
for multiple CLI-based sessions over the network (requires the cryptographic versions of the 
software IP base and IP services images)

In-band management access through SNMP Versions 1, 2c, and 3 get and set requests 

Out-of-band management access through the switch console port to a directly attached terminal or 
to a remote terminal through a serial connection or a modem

Secure Copy Protocol (SCP) feature to provide a secure and authenticated method for copying 
switch configuration or switch image files (requires the cryptographic versions of the software IP 
base and IP services images) 

Configuration replacement and rollback to replace the running configuration on a switch with any 
saved Cisco IOS configuration file

The HTTP client in Cisco IOS supports can send requests to both IPv4 and IPv6 HTTP server, and 
the HTTP server in Cisco IOS can service HTTP requests from both IPv4 and IPv6 HTTP clients

Simple Network and Management Protocol (SNMP) can be configured over IPv6 transport so that 
an IPv6 host can send SNMP queries and receive SNMP notifications from a device running IPv6

IPv6 stateless autoconfiguration to manage link, subnet, and site addressing changes, such as 
management of host and mobile IP addresses

Disabling MAC address learning on a VLAN

DHCP server port-based address allocation for the preassignment of an IP address to a switch port.

Wired location service sends location and attachment tracking information for connected devices to 
a Cisco Mobility Services Engine (MSE).

CPU utilization threshold trap monitors CPU utilization.

LLDP-MED network-policy profile time, length, value (TLV) for creating a profile for voice and 
voice-signalling by specifying the values for VLAN, class of service (CoS), differentiated services 
code point (DSCP), and tagging mode