Cisco Systems 3560 Manual De Usuario

match interface type number [...type number]

Match the specified next hop route out one of the 
specified interfaces.

match ip route-source {access-list-number | 
access-list-name} [...access-list-number | 
...access-list-name]

Match the address specified by the specified advertised 
access lists.

match route-type {local | internal | external [type-1 | 
type-2]}

Match the specified route-type:

local—Locally generated BGP routes.

internal—OSPF intra-area and interarea routes or 
EIGRP internal routes.

external—OSPF external routes (Type 1 or Type 2) 
or EIGRP external routes. 

set dampening halflife reuse suppress 
max-suppress-time

Set BGP route dampening factors.

set local-preference value

Assign a value to a local BGP path.

set origin {igp | egp as | incomplete}

 Set the BGP origin code.

set as-path {tag | prepend as-path-string} 

Modify the BGP autonomous system path.

set level {level-1 | level-2 | level-1-2 | stub-area | 
backbone}

Set the level for routes that are advertised into the 
specified area of the routing domain. The stub-area and 
backbone are OSPF NSSA and backbone areas.

set metric metric value

Set the metric value to give the redistributed routes (for 
EIGRP only). The metric value is an integer 
from -294967295 to 294967295.

set metric bandwidth delay reliability loading mtu

Set the metric value to give the redistributed routes (for 
EIGRP only):

bandwidth—Metric value or IGRP bandwidth of the 
route in kilobits per second in the range 0 to 
4294967295

delay—Route delay in tens of microseconds in the 
range 0 to 4294967295.

reliability—Likelihood of successful packet 
transmission expressed as a number between 0 and 
255, where 255 means 100 percent reliability and 0 
means no reliability.

loading— Effective bandwidth of the route expressed 
as a number from 0 to 255 (255 is 100 percent 
loading).

mtu—Minimum maximum transmission unit (MTU) 
size of the route in bytes in the range 0 to 
4294967295.

set metric-type {type-1 | type-2}

Set the OSPF external metric type for redistributed routes.

Set the multi-exit discriminator (MED) value on prefixes 
advertised to external BGP neighbor to match the IGP 
metric of the next hop.