Cisco Systems 3010 Manual De Usuario
2-6
Cisco IE 3010 Switch Hardware Installation Guide
78-19581-02
Chapter 2 Switch Installation
Installing the Switch
Figure 2-2
Attaching Brackets for 19-Inch Racks
Attaching Brackets for 19-Inch Racks for IP-30 Compliance (Optional)
Before installing the mounting brackets, you need to install the rubber plugs in the unused mounting
holes. The rubber plugs are not supplied with the switch. You can order a kit (part number
IE-3010-IP30KIT) containing the rubber plugs.
holes. The rubber plugs are not supplied with the switch. You can order a kit (part number
IE-3010-IP30KIT) containing the rubber plugs.
You can order a kit (part number IE-3010-IP30KIT) that contains the rubber plugs.
shows a close-up of the rubber plug. You can install the rubber plugs in the holes as shown
in
.
1
Phillips flat-head screws
3
Power-supply-side mounting position
2
Cable-side-mounting position
C isco C G S 2520
207231
1
1
2
3