Cisco Systems ME 2400 Manual De Usuario
1-2
Cisco ME 2400 Ethernet Access Switch Hardware Installation Guide
OL-7678-01
Chapter 1 Product Overview
Front Panel Description
–
100BASE-LX
–
1000BASE-BX
–
1000BASE-LX/LH
–
1000BASE-SX
–
1000BASE-T
–
1000BASE-ZX
–
Coarse wavelength-division multiplexing (CWDM)
Note
When installed in Cisco ME switches, 1000BASE-T SFP modules can operate at 10, 100, or
1000 Mbps in full-duplex mode or at 10 or 100 Mbps in half-duplex mode.
1000 Mbps in full-duplex mode or at 10 or 100 Mbps in half-duplex mode.
Note
By default, the SFP module ports on the Cisco ME switch are configured as network node
interfaces (NNIs). A port can be reconfigured from user network interface (UNI) to NNI and
the reverse, but only four ports on the switch can be NNIs at the same time. For more
information on configuring interfaces, see the software configuration guide.
interfaces (NNIs). A port can be reconfigured from user network interface (UNI) to NNI and
the reverse, but only four ports on the switch can be NNIs at the same time. For more
information on configuring interfaces, see the software configuration guide.
•
These switches support the SFP module patch cable. (Order the SFP module patch cable separately,
part number CAB-SFP-50CM=.)
part number CAB-SFP-50CM=.)
•
Configuration
–
For 10/100 ports, the speed and duplex settings are autonegotiated.
–
For 1000BASE-T SFP module ports, the speed and duplex settings are autonegotiated.
Front Panel Description
The Cisco ME switch front panel descriptions include these sections:
•
•
•
•
•
•