Cisco Systems ME 2400 Manual De Usuario
2-17
Cisco ME 2400 Ethernet Access Switch Hardware Installation Guide
OL-7678-01
Chapter 2 Switch Installation
Installing the Switch
Mounting the Switch on a Wall
For the best support of the switch and cables, make sure the switch is attached securely to wall studs or
to a firmly attached plywood mounting backboard. Mount the switch with the front panel facing up, as
shown in
to a firmly attached plywood mounting backboard. Mount the switch with the front panel facing up, as
shown in
Warning
To comply with safety regulations, mount switches on a wall with the front panel facing up.
Statement 266
Statement 266
Figure 2-18
Mounting the Switch on a Wall
After the switch is mounted on the wall, you need to do these tasks to complete the installation:
•
Power on the switch. See the
•
Connect to a 10/100 port, and run the Initial Configuration Dialog. See the Cisco ME 3400 and ME
2400 Ethernet Access Switches Getting Started Guide for instructions.
2400 Ethernet Access Switches Getting Started Guide for instructions.
•
Connect to the front-panel ports. See the
and
the
to complete the installation.
For configuration instructions about using the CLI setup program, go to
1
User-supplied screws
132673
Cat
aly
st
37
50
SE
RIE
S
13
X
14X
SY
ST
2X
2X
1
1