Cisco Systems ME 2400 Manual De Usuario

To connect the Cisco ME switch to a DC-input power source, follow these steps:

Ethernet cables must be shielded when used in a central office environment. Statement 171

This unit is intended for installation in restricted access areas. A restricted access area can be 
accessed only through the use of a special tool, lock and key, or other means of security. 
Statement 1017

Installation of the equipment must comply with local and national electrical codes.

We recommend that you use 18 AWG copper wiring for Network Equipment Building Systems (NEBS) 
installation. This guideline follows the standard guidelines for DC power wiring in the Central Office.

You can use the grounding lug to attach a wrist strap for ESD protection during servicing.

Locate the DC terminal block plug, the ground lug, and the two number-10-32 screws in the 
DC-switch kit.

Obtain these necessary tools and equipment:

Ratcheting torque screwdriver with a Phillips head that exerts up to 15 pound-force inches (lbf-in.) 
of pressure

Panduit crimping tool with optional controlled cycle mechanism (model CT-700, CT-720, CT-920, 
CT-920CH, CT-930, or CT-940CH)