Cisco Systems 3560X Manual De Usuario
44-5
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Chapter 44 Configuring HSRP
Configuring HSRP
HSRP and Switch Stacks
HSRP hello messages are generated by the stack master. If an HSRP-active stack master fails, a flap in
the HSRP active state might occur. This is because HSRP hello messages are not generated while a new
stack master is elected and initialized, and the standby router might become active after the stack master
fails.
the HSRP active state might occur. This is because HSRP hello messages are not generated while a new
stack master is elected and initialized, and the standby router might become active after the stack master
fails.
Configuring HSRP
•
•
•
•
•
•
•
•
•
Default HSRP Configuration
Table 44-1
Default HSRP Configuration
Feature
Default Setting
HSRP version
Version 1
HSRP groups
None configured
Standby group number
0
Standby MAC address
System assigned as: 0000.0c07.acXX, where XX is the HSRP
group number
group number
Standby priority
100
Standby delay
0 (no delay)
Standby track interface priority
10
Standby hello time
3 seconds
Standby holdtime
10 seconds