Cisco Systems 3560X Manual De Usuario

To upload a configuration file from a switch to a TFTP server for storage, follow these steps:

Verify that the TFTP server is properly configured by referring to the 

.

Log into the switch through the console port, the Ethernet management port, or a Telnet session.

Upload the switch configuration to the TFTP server. Specify the IP address or hostname of the TFTP 
server and the destination filename.

Use one of these privileged EXEC commands:

[[[//location]/directory]/filename] 

[[[//location]/directory]/filename] 

[n]:/directory/startup-config tftp:[[[//location]/directory]/filename]

You can only enter the flashn parameter (for example, flash3) on Catalyst 3750-E switches.

The file is uploaded to the TFTP server.

This example shows how to upload a configuration file from a switch to a TFTP server:

Switch# copy system:running-config tftp://172.16.2.155/tokyo-confg

Write file tokyo-confg on host 172.16.2.155? [confirm] y

#

Writing tokyo-confg!!! [OK]

You can copy configuration files to or from an FTP server.

The FTP protocol requires a client to send a remote username and password on each FTP request to a 
server. When you copy a configuration file from the switch to a server by using FTP, the Cisco IOS 
software sends the first valid username in this list:

The username specified in the copy command if a username is specified.

The username set by the ip ftp username username global configuration command if the command 
is configured.

Anonymous.

The switch sends the first valid password in this list:

The password specified in the copy command if a password is specified.

The password set by the ip ftp password password global configuration command if the command 
is configured.

The switch forms a password named username@switchname.domain. The variable username is the 
username associated with the current session, switchname is the configured hostname, and domain 
is the domain of the switch.