Cisco Systems 3560X Manual De Usuario
13-26
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Chapter 13 Configuring Interface Characteristics
Configuring Ethernet Interfaces
TFTP and the Ethernet Management Port
Use the commands in
when using TFTP to download or upload a configuration file to the boot
loader.
Configuring Ethernet Interfaces
These sections contain this configuration information:
•
•
•
•
•
•
•
•
Table 13-2
Boot Loader Commands
Command
Description
arp
[ip_address]
Displays the currently cached ARP
1
table when this command is entered
without the ip_address parameter.
Enables ARP to associate a MAC address with the specified IP address
when this command is entered with the ip_address parameter.
when this command is entered with the ip_address parameter.
1. ARP = Address Resolution Protocol.
mgmt_clr
Clears the statistics for the Ethernet management port.
mgmt_init
Starts the Ethernet management port.
mgmt_show
Displays the statistics for the Ethernet management port.
ping
host_ip_address
Sends ICMP ECHO_REQUEST packets to the specified network host.
boot tftp:/file-url
...
Loads and boots an executable image from the TFTP server and enters
the command-line interface.
the command-line interface.
For more details, see the command reference for this release.
copy
tftp:/source-file-url
filesystem:/destination-file-
url
url
Copies a Cisco IOS image from the TFTP server to the specified
location.
location.
For more details, see the command reference for this release.