Cisco Systems 3560X Manual De Usuario

There are no static Smartports macros enabled on the switch.

When a macro is applied globally to a switch or to a switch interface, all existing configuration on 
the interface is retained. This is helpful when applying an incremental configuration.

If a command fails because of a syntax or a configuration error, the macro continues to apply the 
remaining commands. You can use the macro global trace macro-name global configuration 
command or the macro trace macro-name interface configuration command to apply and debug a 
macro to find any syntax or configuration errors. 

Some CLI commands are specific to certain interface types. If you apply a macro to an interface that 
does not accept the configuration, the macro fails the syntax or the configuration check, and the 
switch returns an error message.

until

Looping construct.

while

Looping construct.

1. Cisco-default Smartports macros vary, depending on the software version running on your switch.

Use this global configuration macro to enable rapid PVST+, loop guard, and dynamic port error recovery 
for link state failures.

Use this interface configuration macro for increased network security and reliability when connecting a 
desktop device, such as a PC, to a switch port.

Use this interface configuration macro when connecting a desktop device such as a PC with a Cisco IP 
Phone to a switch port. This macro is an extension of the cisco-desktop macro and provides the same 
security and resiliency features, but with the addition of dedicated voice VLANs to ensure proper 
treatment of delay-sensitive voice traffic.

Use this interface configuration macro when connecting an access switch and a distribution switch or 
between access switches connected by using small form-factor pluggable (SFP) modules.

Use this interface configuration macro when connecting the switch and a WAN router.

Use this interface configuration macro when connecting the switch and a wireless access point.