Cisco Systems 3560X Manual De Usuario
35-19
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-21521-01
Chapter 35 Configuring SNMP
Displaying SNMP Status
Displaying SNMP Status
To display SNMP input and output statistics, including the number of illegal community string entries,
errors, and requested variables, use the show snmp privileged EXEC command. You also can use the
other privileged EXEC commands in
errors, and requested variables, use the show snmp privileged EXEC command. You also can use the
other privileged EXEC commands in
the fields in the displays, see the Cisco IOS Configuration Fundamentals Command Reference.
Table 35-6
Commands for Displaying SNMP Information
Feature
Default Setting
show snmp
Displays SNMP statistics.
show snmp engineID
[local | remote]
Displays information on the local SNMP engine and all remote engines that have
been configured on the device.
been configured on the device.
show snmp group
Displays information on each SNMP group on the network.
show snmp pending
Displays information on pending SNMP requests.
show snmp sessions
Displays information on the current SNMP sessions.
show snmp user
Displays information on each SNMP user name in the SNMP users table.
Note
You must use this command to display SNMPv3 configuration information
for auth | noauth | priv mode. This information is not displayed in the
show running-config
for auth | noauth | priv mode. This information is not displayed in the
show running-config
output.