Cisco Systems DS71-MD4 Manual De Usuario

 

 
Ring to Answer 
This option sets the number of rings before the unit answers. 
 
Connectivity Timeout 
This option sets the continuous connectivity time (5 to 255 minutes) before the modem automatically 
disconnects. 
 
Inactivity Timeout 
This option sets the time the modem will automatically disconnect, if there is no activity equaling the 
programmed amount of time (1 to 120 minutes). 

 

1 DTR  Out 

Handshake, Line Driver Inactive State = High: +12V when power is 
applied. Used as a handshake line to enable/disable the receiving of 
characters.

 

2 GND   

Signal 

Ground 

3 RTS  Out 

Handshake, Line Driver Inactive State = High: +12 V when power is 
applied. Not used to enable/disable.

 

4 

TX 

Out 

Transmit Data Out 

5 RX 

In 

Receive 

Data 

In 

6 DSR  In 

Handshake In. –12V when not used. 

7 GND   

Signal Ground, when Jumper JP6-2 is connected to JP6-3. In order for the   
module to take advantage of “DCD Logon/Logoff” and “Auto Connect 
Port”, Jumper JP6-2 is connected to JP6-1 providing DCD In. 

8 CTS  In 

Used as a handshake line to enable/disable the receiving of characters.

 

 
 

Local Modem Option: 
Rings to Answer ....................1 Auto-answer 1-4, Default 2 
Connectivity Timeout ...............2 5-255 minutes, Default 60 minutes 
Inactivity Timeout .................3 1-120 minutes, Default 0 
Exit ...........................X, CR 
Enter Request :