Cisco Systems DS71-MD4 Manual De Usuario

 

 

The menu may vary according to the number of DS74 modules installed in the unit. With a proper 
connection to the unit upon power-up or unit reset, the following menu is displayed:  

 

 

 

NOTE: Only the Admin user will see the Configuration, Unit Reset, and I/O Module Reset 
options. All users will see only the ports assigned to them, alone with ‘Exit’ and ‘Logout’.

 

The configuration menu allows the admin user to choose a module to access and edit its configuration. 
The following pages define each line of the configuration menu. Changes take effect immediately. 

 

Enter the number that corresponds with the Host Module followed by a <cr> and the Host Module 
responds without the option description: 

 

Module 2: admin      on Host EIA-232
Device A         (2,1).........1 
Device B         (2,2).........2 
Device C         (2,3).........3 
Device D         (2,4).........4 
DS-RPC           (5,1).........5  
Configuration .................C Module setup 
I/O Modules Reset ............RM Reset all I/O ports 
Unit Reset ...................RU Resets DS-unit. All internal and external 
 

Exit ..........................X Access to additional menu options 
Logout ........................T Logout the user 
Enter Request :c 

Module Configuration 
DS71-MD4        (2)..........1 Host Module 
DS74            (3)..........2 I/O EIA232 ports 
DS-RPC          (5)..........3 Assign users, outlet name, Enable/Disable