Cisco Systems DS71-MD4 Manual De Usuario

Descargar
Página de 29
 
DS71-MD4 Serial host and 56k Modem 
22 
Auto Connect 
This feature allows the admin to select the module and port that the user will be automatically connected 
on dial-in.  The auto connect port has priority over the login setup menu enable/disable selection, thus 
prevent the menu selection screen from appearing at the initial login sequence.  
  
 
 
Select 1) to assign module and port. 
  
 
 
Select 2) to turn on or off the Auto Connect feature 
 
 
 
Dial-Back Number 
This feature allows user to dial in, hang up and the unit dials the assigned number back when using a 
secure phone line. Select a user number and the module displays the following:  
 
 
 
Select “Phone number” option to enter a phone number assigned to the user.  
 
 
 
Select “Dialback” option to enable or disable the dial back feature. Default is Disabled. 
 
 
      +----+------------+------+----------+
      |User|    Name    | M: P |  Auto    | 
      +----+------------+------+----------+ 
      |  1 | admin      | 1: 1 | Disabled | 
      +----+------------+------+----------+ 
      Dial-in Auto Connect Port .............1 
      Enabled/Disable .......................2 
      Exit ..................................X,CR 
Enter Request :1 
Enter Auto Connect Module (1 to 9): 2
Enter Auto Connect Port (1 to 4):4 
Enable ? (Y/N, CR for no change):
User Dialback Phone number
Dialback Delay:10 seconds 
+----+-----------+-----------------+----------+ 
|User|   Name    |  Phone number   | Dialback | 
+----+-----------+-----------------+----------+ 
|  1 | admin     |                 | Disabled | 
+----+-----------+-----------------+----------+ 
Phone number ..........................1 
Dialback option .......................2 
Dialback Delay ........................3 
Exit ..................................X,CR 
Dial back Phone number is .............
Enter new Phone number (<= 15 digits): 
Dial back option is ...................Disabled
Enable ? (Y/N, CR for no change):