Cisco Systems DS71-MD4 Manual De Usuario

 

•  Connect the Host Module’s EIA-232 port to the adapter via the RJ08X007  rolled flat ribbon 

cable.  

•  Default configuration is 9600 bps, 8 data bits, 1 stop bit and no parity. 

 

NOTE:  At any time during the session you need to go to another menu, use the Attention 
Character = semi-colon (;).  Press the attention character key 5 consecutive times to get back to the 
main status menu.  

 

NOTE: Depending on the DS-Series model, the menus will vary according to the number of DS74 
modules installed in the unit. If this is not an initial set-up and Password has already been enabled, 
you are prompted to login. After logging in successfully, invoke the main menu by sending the 
attention character five times (;;;;;). 

 

NOTE: Password feature is case sensitive. (Default is user/password is root/baytech) 

 

The following Header and Menu appears or similar: 
 
Figure 1 

 

 

Select option ‘C’ for the configuration menu. Select the DS71-MD4 module option and the following 
menu is displayed: