Cisco Systems ICS-7750 Manual De Usuario

The ICSConfig program is a component that is installed on the SPE running 
System Manager. When the Cisco ICS 7750 is started for the first time, the system 
must collect certain configuration information to communicate with the network. 
ICSConfig runs a discovery routine that identifies all the cards and the software 
installed on the cards. If the discovery routine finds errors, it displays error 
messages. The discovery stage must finish without any errors before the 
configuration stage can begin.

The web-based ICSConfig program enables the installer to enter system setup and 
network information, including the following:

IP address information for the systems cards installed in the ICS 7750 chassis

Network and Dynamic Host Configuration Program (DHCP) information for 
IP phones and other network devices

Domain Name Server (DNS) and gateway information

System switch 
processor (SSP) card

Provides unified monitoring, configuration, and 
authentication of interconnected switches through a 
web-based interface.

Offers management redundancy supported by the Hot 
Standby Router Protocol (HSRP), support for IEEE 802.1p 
class of service (CoS) for classification and preferential 
treatment of high-priority traffic.

Manages network security through the Terminal Access 
Controller Access Control System Plus (TACACS+) 
feature.

Cisco 
CallManager

SPE cards

Enables a telephony network consisting of IP terminals, 
gateways, and voice applications.

Provides signaling and call control services to Cisco 
integrated multimedia applications, as well as third-party 
applications.