Cisco Systems Catalyst 2955 Manual De Usuario

Clearance to front and rear panels meet these conditions:

Front-panel LEDs can be easily read.

Access to ports is sufficient for unrestricted cabling.

Front-panel direct current (DC) power and relay connector is within 
reach of the connection to the DC power source.

Airflow around the switch and through the vents is unrestricted. To prevent 
the switch from overheating, there must be a minimum of 3 inches between 
any other device and the top, bottom, or sides of the switch.

Temperature surrounding the unit does not exceed 140°F (60°C).

When the switch is installed in an industrial enclosure, the 
temperature within the enclosure is greater than normal room 
temperature outside the enclosure.

The temperature inside the enclosure cannot exceed 140

o

F (60

o

C), 

the maximum ambient enclosure temperature of the switch.

Cabling is away from sources of electrical noise, such as radios, power lines, 
and fluorescent lighting fixtures.

Carefully remove the contents from the shipping container, and check each item 
for damage. If any item is missing or damaged, contact your Cisco representative 
or reseller for support. Return all packing materials to the shipping container and 
save them.

The switch is shipped with these items:

Catalyst 2955 Hardware Installation Guide (Cisco part number 
DOC-7814944=)

Power and relay connector 

Switch installation protective liner