Cisco Systems SFS 7012 Manual De Usuario

Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide

OL-8787-04

Chapter

Note

If the spine module RS-232 port is connected to a terminal emulation program, the user will be able to
view the switch boot process. Be certain to use a null-modem/crossover serial cable for the console port.
The settings for the terminal emulation device should be:

–

8 data bits

–

no parity bits

–

1 stop bit

–

56K baud

–

Use VT100 emulation.

–

Flow control = XON/XOFF

Figure 2-14 SFS 7012 RS-232 Connector

Step 3

Verify the IP address with the command line interface (CLI) command showChassisIpAddr
command. The system returns the information similar to the following:

Chassis IP Address:

192.168.100.9

Net mask: 0xffffff00

Changing the SFS 7012 IP Address and Default Gateway via the CLI

The CLI can be accessed via Telnet, SSH, or through the SFS 7012 RS232 serial ports.

Step 1

Connect null-modem/crossover serial cables to the RS-232 ports of the SFS 7012. If using a terminal
emulation device, the settings should be:

–

8 data bits

–

no parity bits

–

1 stop bit

–

56K baud

–

Use VT100 emulation.

–

Flow control = XON/XOFF

1 (Managed)

Spine Module

RS-232 Port

Fan

2 (Managed)

3 (Unmanaged)