Cisco Systems SG30052PK9NA Manual De Usuario

Managing QoS Statistics

Cisco Small Business 300 Series Managed Switch Administration Guide 

440

 

The Policy Binding page shows which policy profile is bound and to which port. 
When a policy profile is bound to a specific port, it is active on that port. Only one 
policy profile can be configured on a single port, but a single policy can be bound 
to more than one port.

When a policy is bound to a port, it filters and applies QoS to ingress traffic that 
belongs to the flows defined in the policy. The policy does not apply to traffic 
egress to the same port.

To edit a policy, it must first be removed (unbound) from all those ports to which it 
is bound.

It is possible to either bind a port to a policy or to an ACL but both cannot be bound.

To define policy binding:

Click Quality of Service > QoS Advanced Mode > Policy Binding.

Select a Policy Name and Interface Type if required.

Click Go. The policy is selected.

Select the following for the policy/interface:

•

Binding—Select to bind the policy to the interface.

•

Permit Any—Select to forward packets on the interface if they do not match 
any policy. 

Permit Any can be defined only if IP Source Guard is not activated on 

the interface.

Click Apply. The QoS policy binding is defined, and the Running Configuration file 
is updated.

From these pages you can manage the Single Policer, Aggregated Policer, and 
view queues statistics.