Cisco Systems SG30052PK9NA Manual De Usuario

Active Image

41

Cisco Small Business 300 Series Managed Switch Administration Guide 

•

If SSH server authentication is not enabled, the operation succeeds for any 
SCP server.

There are two firmware images stored on the device. One of the images is 
identified as the active image and other image is identified as the inactive image. 
The device boots from the image you set as the active image. You can change the 
image identified as the inactive image to the active image. (You can reboot the 
device by using the process described in the 

 section).

To select the active image:

Click Administration > File Management > Active Image.

The page displays the following:

•

Active Image—Displays the image file that is currently active on the device.

•

Active Image Version Number—Displays the firmware version of the active 
image.

•

Active Image After Reboot—Displays the image that is active after reboot.

•

Active Image Version Number After Reboot—Displays the firmware 
version of the active image as it be after reboot.

Select the image from the Active Image After Reboot menu to identify the 
firmware image that is used as the active image after the device is rebooted. The 
Active Image Version Number After Reboot displays the firmware version of the 
active image that is used after the device is rebooted. 

Click Apply. The active image selection is updated.

The Download/Backup Configuration/Log page enables:

•

Backing up configuration files or logs from the device to an external device.