Cisco Systems EA6500 Manual De Usuario

  IP fast switching is enabled

  IP fast switching on the same interface is disabled

  IP Flow switching is disabled

  IP CEF switching is enabled

  IP Fast switching turbo vector

  IP Normal CEF switching turbo vector

  IP multicast fast switching is enabled

  IP multicast distributed fast switching is disabled

  IP route-cache flags are Fast, CEF

  Router Discovery is disabled

  IP output packet accounting is disabled

  IP access violation accounting is disabled

  TCP/IP header compression is disabled

  RTP/IP header compression is disabled

  Probe proxy name replies are disabled

  Policy routing is disabled

  Network address translation is disabled

  WCCP Redirect outbound is disabled

  WCCP Redirect exclude is disabled

  BGP Policy Mapping is disabled

IP multicast multilayer switching is enabled

IP mls switching is enabled

Router#

The show ip mroute command displays the IP multicast routing table.

To display the IP multicast routing table, perform this task:

This example shows how to display the IP multicast routing table:

Router# show ip mroute 230.13.13.1

IP Multicast Routing Table

Flags:D - Dense, S - Sparse, s - SSM Group, C - Connected, L - Local,

       P - Pruned, R - RP-bit set, F - Register flag, T - SPT-bit set,

       J - Join SPT, M - MSDP created entry, X - Proxy Join Timer Running

       A - Advertised via MSDP, U - URD, I - Received Source Specific Host

           Report 

Outgoing interface flags:H - Hardware switched

Timers:Uptime/Expires

Interface state:Interface, Next-Hop or VCD, State/Mode

 

(*, 230.13.13.1), 00:16:41/00:00:00, RP 10.15.1.20, flags:SJC

  Incoming interface:GigabitEthernet4/8, RPF nbr 10.15.1.20

  Outgoing interface list:

 GigabitEthernet4/9, Forward/Sparse-Dense, 00:16:41/00:00:00, H

(*, 230.13.13.2), 00:16:41/00:00:00, RP 10.15.1.20, flags:SJC

 Incoming interface:GigabitEthernet4/8, RPF nbr 10.15.1.20, RPF-MFD

  Outgoing interface list:

    GigabitEthernet4/9, Forward/Sparse-Dense, 00:16:41/00:00:00, H

 

(10.20.1.15, 230.13.13.1), 00:14:31/00:01:40, flags:CJT

 Incoming interface:GigabitEthernet4/8, RPF nbr 10.15.1.20, RPF-MFD

Router# show ip mroute [hostname | group_number]

Displays the IP multicast routing table and the 
hardware-switched interfaces.