Cisco Systems EA6500 Manual De Usuario

You can configure the minimum granularity of the flow mask for the MLS cache on the PFC. The actual 
flow mask used will be at least of the granularity specified by this command. For information on how 
the different flow masks work, see the 

This command purges all existing shortcuts in the MLS cache and affects the number of active shortcuts 
on the PFC. Be careful when using this command.

To configure the minimum IPX MLS flow mask, perform this task:

This example displays how to configure the minimum IPX MLS flow mask to destination:

Router(config)# mls flow ipx destination

Router(config)#

To display the IPX MLS flow mask configuration, perform this task:

This example displays the MLS flow mask configuration:

Router# show mls flowmask

current ip flowmask for unicast: destination only

current ipx flowmask for unicast: destination only

This section describes the commands used to display IPX MLS configuration and statistics for the switch 
and the various interfaces and is separated into the following:

Router(config)# mls flow ipx {destination | 

}

Configures the minimum IPX MLS flow mask.

Router(config)# no mls flow ipx 

Reverts to the default IPX MLS flow mask.

Router# show mls flowmask 

Displays the flow mask configuration.