Cisco Systems EA6500 Manual De Usuario

Descargar
Página de 570
 
21-4
Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E
78-14099-04
Chapter 21      Configuring IGMP Snooping
Understanding How IGMP Snooping Works
Figure 21-2 Second Host Joining a Multicast Group
Leaving a Multicast Group
These sections describe leaving a multicast group:
  •
  •
Normal Leave Processing
Interested hosts must continue to respond to the periodic general IGMP queries. As long as at least one 
host in the VLAN responds to the periodic general IGMP queries, the multicast router continues 
forwarding the multicast traffic to the VLAN. When hosts want to leave a multicast group, they can 
either ignore the periodic general IGMP queries (called a “silent leave”), or they can send a 
group-specific IGMPv2 leave message.
When IGMP snooping receives a group-specific IGMPv2 leave message from a host, it sends out a 
MAC-based a group-specific query to determine if any other devices connected to that interface are 
interested in traffic for the specific multicast group. If IGMP snooping does not receive an IGMP Join 
message in response to the general query, it assumes that no other devices connected to the interface are 
interested in receiving traffic for this multicast group, and it removes the interface from its Layer 2 
forwarding table entry for that multicast group. If the leave message was from the only remaining 
interface with hosts interested in the group and IGMP snooping does not receive an IGMP Join in 
Table 21-2
Updated IGMP Snooping Forwarding Table
Destination Address
Type of Packet
Ports
0100.5exx.xxxx
IGMP
0
0100.5e01.0203
!IGMP
1, 2, 5
Forwarding
table
CPU
Host 1
Host 2
Host 3
Host 4
Router A
PFC
VLAN
1
0
2
3
4
5
45751