Cisco Systems EA6500 Manual De Usuario
3-2
Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E
78-14099-04
Chapter 3 Configuring the Switch for the First Time
Configuring the Switch
Configuring the Switch
These sections describe how to configure the switch:
•
•
•
•
•
•
•
•
Note
With Release 12.1(11b)E and later, when you are in configuration mode you can enter EXEC mode-level
commands by entering the do keyword before the EXEC mode-level command.
commands by entering the do keyword before the EXEC mode-level command.
Using the Setup Facility or the setup Command
These sections describe the setup facility and the setup command:
•
•
•
Setup Overview
At initial startup, the switch automatically defaults to the setup facility. (The setup command facility
functions exactly the same as a completely unconfigured system functions when you first boot it up.)
You can run the setup facility by entering the setup command at the enable prompt (#).
functions exactly the same as a completely unconfigured system functions when you first boot it up.)
You can run the setup facility by entering the setup command at the enable prompt (#).
Table 3-1
Default Configuration
Feature
Default Value
Administrative connection
Normal mode
Global information
No value for the following:
•
System name
•
System contact
•
Location
System clock
No value for system clock time
Passwords
No passwords configured for normal mode or
enable mode (press the Return key)
enable mode (press the Return key)
Prompt
Router>