Cisco Systems EA6500 Manual De Usuario
31-16
Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E
78-14099-04
Chapter 31 Configuring PFC QoS
Understanding How PFC QoS Works
Note
The explanations in this section use default values. You can configure many of the parameters (see the
). All LAN ports of the same type use the same
drop-threshold configuration.
illustrates the drop thresholds for a 1q4t ingress LAN port. Drop thresholds in other
configurations function similarly.
Figure 31-9 Receive Queue Drop Thresholds
PFC Marking and Policing
Note
•
To mark untrusted traffic without policing in Release 12.1(12c)E1 and later releases, use the set ip
dscp or set ip precedence policy map class commands (see the
dscp or set ip precedence policy map class commands (see the
).
•
To mark untrusted traffic without policing in earlier releases, create a policer that only marks and
does not police.
does not police.
These sections describe PFC marking and policing:
•
•
CoS
0
an
d
1
CoS
2
an
d
3
Co
S
4
an
d
5
C
oS
6
an
d
7
Traffic is dropped
Drop threshold 4: 100%
Drop threshold 3: 80%
Drop threshold 2: 60%
Drop threshold 1: 50%
Available for
traffic with any
CoS value
traffic with any
CoS value
Reserved for
CoS 6 and 7
Reserved for
CoS 4 and higher
CoS 4 and higher
Reserved for
CoS 2 and higher
CoS 2 and higher
Receive queue
(Default values shown)
100% available for CoS 6 and 7
80% available for CoS 4 and 5
60% available for CoS 2 and 3
50% available for CoS 0 and 1
26249