Cisco Systems EA6500 Manual De Usuario

0x6005—diagnostic—DEC DECnet Diagnostics

0x6007—lavc-sca—DEC Local-Area VAX Cluster (LAVC), SCA

0x6008—amber—DEC AMBER

0x6009—mumps—DEC MUMPS

0x8038—dec-spanning—DEC LANBridge Management

0x8039—dsm—DEC DSM/DDP

0x8040—netbios—DEC PATHWORKS DECnet NETBIOS Emulation

0x8041—msdos—DEC Local Area System Transport

0x8042—etype-8042—DEC unassigned

0x809B—appletalk—Kinetics EtherTalk (AppleTalk over Ethernet)

0x80F3—aarp—Kinetics AppleTalk Address Resolution Protocol (AARP)

This example shows how to create a MAC-Layer access list named mac_layer that denies dec-phase-iv 
traffic with source address 0000.4700.0001 and destination address 0000.4700.0009, but permits all 
other traffic:

Router(config)# mac access-list extended mac_layer 

Router(config-ext-macl)# deny 0000.4700.0001 0.0.0 0000.4700.0009 0.0.0 dec-phase-iv 

Router(config-ext-macl)# permit any any 

These sections describe class map configuration:

You can also create class maps during policy map creation with the policy-map class command (see the 

).

To create a class map, perform this task: 

Except for MAC-Layer ACLs (see the 

), access lists are not documented in this publication. See the reference under 

access-list in the 

.

Router(config)# class-map class_name 

Creates a class map. 

Router(config)# no class-map class_name 

Deletes a class map.