Cisco Systems EA6500 Manual De Usuario

vlan_range is first_vlan_ID - last_vlan_ID 

mixed_vlan_list is, in any order, single_vlan , vlan_range , ...

When clearing monitor sessions, note the following syntax information:

The no monitor session number command entered with no other parameters clears 
session session_number.

session_range is first_session_number-last_session_number 

In the no monitor session range command, do not enter spaces before or after the dash. If 
you enter multiple ranges, do not enter spaces before or after the commas.

This example shows how to configure session 1 to monitor bidirectional traffic from Fast Ethernet 
port 5/1:

Router(config)# monitor session 1 source interface fastethernet 5/1 

To monitor specific VLANs when the local or RSPAN source is a trunk port, perform this task:

This example shows how to monitor VLANs 1 through 5 and VLAN 9 when the source is a trunk port:

Router(config)# monitor session 2 filter vlan 1 - 5 , 9

These sections describe how to configure local SPAN and RSPAN destinations:

Router(config)# monitor session session_number filter 

{vlan_ID} [, | -]

Monitors specific VLANs when the source is a trunk port. 

Router(config)# no monitor session session_number 

 {vlan_ID} 

Clears trunk source configuration.