Cisco Systems EA6500 Manual De Usuario

To verify that ifIndex commands have been configured, use the more system:running-config command.

SNMP ifIndex persistence is disabled by default. To globally enableSNMP ifIndex persistence, perform 
this task:

To globally disable SNMP ifIndex persistence after enabling it, perform this task:

To enable SNMP ifIndex persistence only on a specific interface, perform this task:

The no snmp ifindex persistence interface command cannot be used on subinterfaces. A command 
applied to an interface is automatically applied to all the subinterfaces associated with that interface.

Router(config)# snmp-server ifindex persist 

Globally enables SNMP ifIndex persistence.

Router(config)# no snmp-server ifindex persist 

Globally disables SNMP ifIndex persistence.

Router(config)# interface {vlan vlan_ID} | 

{type

1

 slot/port} | {port-channel 

port_channel_number}

1.

type = any supported interface type.

Selects an interface to configure. 

Router(config-if)# snmp ifindex persist 

Enables SNMP ifIndex persistence on the specified 
interface.

Router(config-if)# no snmp ifindex persist 

Disables SNMP ifIndex persistence on the specified 
interface.

Router(config-if)# exit 

Exits interface configuration mode.