Cisco Systems EA6500 Manual De Usuario

3-19

Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E

78-14099-04

Chapter 3 Configuring the Switch for the First Time

Recovering a Lost Enable Password

Exiting a Privilege Level

To exit to a specified privilege level, perform this task:

Displaying the Password, Access Level, and Privilege Level Configuration

To display the password, access level, and privilege level configuration, perform this task:

This example shows how to display the password and access level configuration:

Router# show running-config

<...output truncated...>

enable password lab

<...output truncated...>

This example shows how to display the privilege level configuration:

Router# show privilege

Current privilege level is 15

Router#

Recovering a Lost Enable Password

To recover a lost enable password, follow these steps:

Step 1

Connect to the console interface.

Step 2

Configure the switch to boot up without reading the configuration memory (NVRAM).

Step 3

Reboot the system.

Step 4

Access enable mode (which can be done without a password when one is not configured).

Step 5

View or change the password, or erase the configuration.

Step 6

Reconfigure the switch to boot up and read the NVRAM as it normally does.

Step 7

Reboot the system.

Note

Password recovery requires the Break signal. You must be familiar with how your terminal or PC
terminal emulator issues this signal. For example, in ProComm, the Alt-B keys generate the Break
signal. In a Windows terminal session, you press the Break or Ctrl and Break keys simultaneously.

Command

Purpose

Router# disable level

Exits to a specified privilege level.