Cisco Systems IGX 8 Manual De Usuario
-11
Network Management Control
Network Control Terminal: StrataView Plus workstation and StrataCom software required for
graphical display of network status, statistics gathering and display,
and automatic downloading of software.
and automatic downloading of software.
Control Terminal:
DEC VT100, WYSE 85, Televideo 970 or equivalent terminal for
basic system configuring and alarm monitoring.
basic system configuring and alarm monitoring.
Remote Alarm Reporting:
Auto-dial modem connects to one of two control ports on each IGX
8 node for automatic reporting of network alarms.
8 node for automatic reporting of network alarms.
Remote Diagnostics:
Auto-answer modem connects to one of two control ports on each
IGX node for remote diagnostic access by StrataCom ISC or other
authorized personnel.
IGX node for remote diagnostic access by StrataCom ISC or other
authorized personnel.
Network Control Ports:
Two ports per node, (one RS 232C interface and one Ethernet LAN
port).
port).
Alarm Notification:
Status of all trunks and nodes in network distributed to and stored by
each individual node. Reported to StrataView Plus workstation at
connecting node.
each individual node. Reported to StrataView Plus workstation at
connecting node.
External Alarms:
Meets Bellcore Compatibility Bulletin #143 and AT&T Technical
Reference PUB 43801 DS1 (T1) facility alarm requirements when
equipped with DTI group.
Reference PUB 43801 DS1 (T1) facility alarm requirements when
equipped with DTI group.
Indicators and Controls:
Active and Fail lights on all cards and power supplies.