Cisco Systems SLM2048 Manual De Usuario

If the above recommendations do not work, try the same steps by using a 
different computer. The switch might have some hardware problems if the 
second computer also fails to establish a link, please contact technical 
support for further assistance.

If you need help resolving a problem, visit the Cisco Small 
Business Support Community at 

. For technical documentation and other links, see 

.

The 

Factory Default window allows network managers to reset the switch 

to the factory defaults shipped with the switch. Restoring factory defaults 
erases the configuration file. This should only be performed as a last 
resort.

Restoring the factory defaults will erase all of your current configuration 
settings. Before you restore the factory defaults, you can save a backup of 
your current configuration settings from the 

Save Configuration 

window.

You can also restore the factory defaults of your switch by pressing and 
holding the Reset button on the front of the switch for more than ten 
seconds.

Congratulations, you are now ready to start using your switch. Consider 
taking some of the following steps:

• Go to the “Getting Started” section of the 

Cisco Small Business SLM 

Smart Switch Administration Guide. This is the starting point for 
detailed configuration of the switch.

• Change the default password of the switch to protect it from 

unauthorized access.

• Visit the software downloads area at 

http://tools.cisco.com/support/

downloads

 and navigate to your model of the switch. Check for the 

latest version of software to ensure your switch is running the most 
recent version of the firmware.

• Review additional documentation and resources at 

http://

www.cisco.com/en/US/products/ps9994/
tsd_products_support_series_home.html