Cisco Systems SLM248P Manual De Usuario
Cisco Small Business SLM Series Smart Switch Installation Guide
7
N
OTE
If you have changed the switch IP address or are using DHCP to
assign it, enter the new IP address assigned to the switch. The
ip address of the computer you are using to configure the
switch, must be on the same subnet as the switch.
assign it, enter the new IP address assigned to the switch. The
ip address of the computer you are using to configure the
switch, must be on the same subnet as the switch.
S
TEP
4
When the login page appears, enter the user name and password.
The default user name is
admin. The default password is admin.
Passwords are case sensitive.
S
TEP
5
Click Login.
S
TEP
6
Follow the on-screen prompts to complete the initial configuration.
Troubleshooting and
Suggested Next Steps
Suggested Next Steps
Verifying the Hardware Installation
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the LED states, as described in
.
• Connect a computer to an available LAN port and verify that you can
connect to a website on the Internet, such as
www.cisco.com
.
If you encounter problems, consider the following:
• Reset the switch to its factory default settings by holding down the
reset button for 10 seconds.
• Set a temporary IP address on an attached device within the range of
192.168.1.
X and subnet mask of 255.255.255.0.
• Use the ping utility to verify connectivity.
4