Cisco Systems SLM2008PTNA Manual De Usuario

802.1X

Cisco Small Business SG200 Series 8-port Smart Switch

157

 

•

Reset Port—Select to reset the port if it has been shut down by the Port 
Security feature.

Click Apply and then click Close. Your changes are saved to the Running 
Configuration.

To view the current list of secure MAC addresses, associated ports, and VLANs, 
click Secure Address Table on the Port Security page.

For each interface, the Secure Address Table lists each secured statically 
configured MAC address, regardless of the locked or unlocked status of the port. 
The table also lists dynamically learned MAC addresses for locked ports. Dynamic 
entries for a port are cleared when the port is changed from locked to unlocked or 
when the link goes down.

You can click Static Address Table to display the page for configuring static 
addresses. See 

. Be sure to set the Status 

field for the entry to Secure. 

You can click Port Security Table to redisplay the Port Security page.

Local Area Networks (LANs) are often deployed in environments that permit 
unauthorized devices to be physically attached to the LAN infrastructure, or permit 
unauthorized users to attempt to access the LAN through equipment already 
attached. In such environments, it might be desirable to restrict access to the 
services offered by the LAN to those users and devices that are permitted to use 
those services.

Port-based access control provides a method for networks to control whether 
hosts can access services provided by a connected port. You can configure the 
switch to use port-based network access control based on the IEEE 802.1x 
protocol.

The 802.1x protocol defines three types of entities:

•

Supplicant: An entity that requests access to a port at the remote end of the 
link. The supplicant provides credentials to the network that another node