Cisco Systems SLM2008PTNA Manual De Usuario

802.1X

Cisco Small Business SG200 Series 8-port Smart Switch

162

 

•

Max EAP Requests—The preconfigured maximum number of times the 
switch can send an EAP request before restarting the authentication process 
if it does not receive a response. 

•

Termination Cause—The reason for termination.

Click Apply and then click Close. Your changes are saved to the Running 
Configuration.

Use the Supplicant Port Authentication page to configure port access control on 
ports that are configured in the supplicant role. To enable a port as an supplicant, 
see 

.

To configure supplicant port authentication:

Click Security > 802.1X > Supplicant Port Authentication in the navigation 
window.

Select the port to configure and click Edit.

The Current Port Control field shows the current authorization mode for the port.

Configure the following:

•

Administrative Port Control—Select the port authorization mode. The 
possible values are:

-

Force Unauthorized—Denies the selected interface system access by 
moving the interface into unauthorized state.

-

Auto—The switch detects the mode of the interface based on the 
outcome of authentication exchanges between the supplicant, the 
authenticator, and the authentication server.

-

Force Authorized—The port is placed into an authorized state without 
requiring authentication with the authentication server. The interface 
sends and receives normal traffic without client port-based 
authentication.