Cisco Systems SLM2008PTNA Manual De Usuario

Etherlike Statistics

Cisco Small Business SG200 Series 8-port Smart Switch

23

 

The system collects and reports statistics on ports and LAGs in accordance with 
RFC2665. 

To display this page, click Status and Statistics > Etherlike in the navigation 
window.

Select the interface (Port or LAG) for which you want to display statistics, then 
select a refresh rate for the statistics. These statistics are cumulative since the last 
time the page was refreshed. The following information displays for the selected 
interface:

•

Frame Check Sequence (FCS) Errors—FCS errors received.

•

Single Collision Frames—Signal collision frame errors received.

•

Late Collisions—Late collision frames received.

•

Excessive Collisions—Excessive collision frames received.

•

Multiple Collisions—Multiple collision frames received.

•

Oversize Packets—Packets received that were longer than 1518 octets 
(excluding framing bits and including FCS octets) and were otherwise well-
formed.

•

Internal MAC Receive Errors—Internal MAC errors received on the LAG or 
interface.

•

Alignment Errors—Packets received with alignment errors

•

Pause Frames Received—Pause frames received on the LAG or interface.

•

Pause Frames Transmitted—Pause frames transmitted from the LAG or 
interface.

To clear statistics counters:

Click Clear Interface Counters to reset all counters to 0 for the selected 
interface.

Click Clear All Interface Counters to reset all counters to 0 for all 
interfaces.