Cisco Systems SLM2008PTNA Manual De Usuario

LLDP-MED

Cisco Small Business SG200 Series 8-port Smart Switch

83

 

•

Coordinates—Switch GPS coordinates in hexadecimal format.

•

ELIN Address—The ELIN number.

•

Country—Country where the city is located. This is a two-character code as 
defined by ISO 3166.

•

City—City where the street is located.

•

Street—Street where the building is located.

•

Building—Building in which the switch is located.

 The City, Street, and Building fields share the maximum character 

limitation; i.e., an entry in one field reduces the maximum allowable characters 
in the others. The maximum combine length of the city, street, and building fields 
is 246 characters. The characters ', ", %, and ? are not supported.

Click Apply. Your changes are saved to the Running Configuration.

The LLDP for Media Endpoint Devices (LLDP-MED) protocol provides extensions 
to the LLDP standard for network configuration and policy, device location, Power-
over-Ethernet management, and inventory management.

Use the LLDP-MED Port Settings page to view and configure LLDP-MED 
operation on ports.

To configure these settings on a port:

Click Administration > Discovery - LLDP-MED > LLDP-MED Port Settings in the 
navigation window.

Each entry in the LLDP-MED Port Settings Table displays the LLDP-MED 
configuration for a port. 

Select a port to configure and click Edit.

Specify the following for the selected port:

•

LLDP-MED Status—Select to enable LLDP-MED operation on the port.

•

Configuration Notification—Select to enable the switch to send 
notifications when there are topology changes on the network.