Cisco Systems IE 3010 Manual De Usuario
1-3
Cisco IE 3010 Switch Hardware Installation Guide
78-19581-02
Chapter 1 Product Overview
Cable Side
The100BASE-FX SFP ports and the 10/100 PoE ports are grouped in pairs. The first member of the pair
(port 1) is above the second member (port 2) on the left. Port 3 is above port 4, and so on.
The dual-purpose ports are numbered 1 and 2.
(port 1) is above the second member (port 2) on the left. Port 3 is above port 4, and so on.
The dual-purpose ports are numbered 1 and 2.
Figure 1-2
Cisco IE-3010-16S-8PC Cable-Side View
10/100 Fast Ethernet Ports
You can set the 10/100 ports on the switch to operate in any combination of half duplex, full duplex, or
10 or 100 Mb/s. You can set the ports for speed and duplex autonegotiation. The default setting is
autonegotiate.
10 or 100 Mb/s. You can set the ports for speed and duplex autonegotiation. The default setting is
autonegotiate.
When set for autonegotiation, the switch determines the speed and duplex settings of the attached device
and advertises its own capabilities. If the connected device also supports autonegotiation, the switch
negotiates the best connection (the fastest line speed that both devices support and full-duplex
transmission if the attached device supports it) and configures itself accordingly. In all cases, the
attached device must be within 328 feet (100 meters).
and advertises its own capabilities. If the connected device also supports autonegotiation, the switch
negotiates the best connection (the fastest line speed that both devices support and full-duplex
transmission if the attached device supports it) and configures itself accordingly. In all cases, the
attached device must be within 328 feet (100 meters).
PoE Ports
Warning
Voltages that present a shock hazard may exist on Power over Ethernet (PoE) circuits if
interconnections are made using uninsulated exposed metal contacts, conductors, or terminals.
Avoid using such interconnection methods, unless the exposed metal parts are located within a
restricted access location and users and service people who are authorized within the restricted
access location are made aware of the hazard. A restricted access area can be accessed only through
the use of a special tool, lock and key or other means of security. Statement 1072
interconnections are made using uninsulated exposed metal contacts, conductors, or terminals.
Avoid using such interconnection methods, unless the exposed metal parts are located within a
restricted access location and users and service people who are authorized within the restricted
access location are made aware of the hazard. A restricted access area can be accessed only through
the use of a special tool, lock and key or other means of security. Statement 1072
1
SD flash memory card slot
6
Dual purpose ports
2
LEDs
7
RJ-45 console port
3
Express Setup button
8
USB (mini-Type B) console port
4
100BASE-FX SFP ports
9
Power-input terminal
5
10/100 PoE ports
10
Alarm port
PO W ER
O VER
ETHERNET
PO W ER
O VER
ETHERNET
8
4
10
2
1
3
6
5
7
9
208363
C isco IE 3010