Cisco Systems IE 3010 Manual De Usuario
1-11
Cisco IE 3010 Switch Hardware Installation Guide
78-19581-02
Chapter 1 Product Overview
Cable Side
PoE LED
Dual-Purpose Port LEDs
The dual-purpose port LEDs identify the connection as either a copper-based connector or an SFP
module. The ports can autonegotiate, or you can manually configure each dual-purpose port as either
10/100/1000 with copper connectors or as an SFP-module port, but not as both types at the same time.
See
module. The ports can autonegotiate, or you can manually configure each dual-purpose port as either
10/100/1000 with copper connectors or as an SFP-module port, but not as both types at the same time.
See
SD Flash Memory Card LED
SD Flash Memory Card
The switch ships with the Secure Digital (SD) flash memory card installed. See
. The switch stores the Cisco IOS software images and the switch configuration on the card.
You should not remove the card unless you want to use it in a replacement switch. You then do not have
to reconfigure the new switch. See the
to reconfigure the new switch. See the
for
information.
Table 1-9
PoE LED
Color
Meaning
Off
PoE is not enabled.
Green
PoE is enabled. Ports are functioning correctly.
Amber
PoE is enabled, but an error is present.
Table 1-10
SD Flash Memory Card LED
Color
System Status
Off / blinking green
SD flash memory card transfer in progress.
Blinking amber
SD flash memory card is not present (slow blinking).
Unsupported SD flash memory card is detected (fast blinking).
Amber
Error accessing the SD flash memory card.
Cisco IOS boot image cannot be found.
Green
SD flash memory card is functioning.