Cisco Systems IE 3010 Manual De Usuario

The switch has two slots for power-supply modules:

PWR-RGD-LOW-DC/IA: low-voltage DC (for voltage information, see 

PWR-RGD-AC-DC/IA: high-voltage AC or DC (for voltage information, see 

)

The switch supports these power-supply module combinations:

Single low-voltage DC

Single high-voltage AC or DC

Two high-voltage AC or DC

Two low-voltage DC

One high-voltage AC or DC and one low-voltage DC

For information on installing the power-supply modules, see 

 

See 

 for information on the power supply LEDs.

Cisco IOS CLI 

You can configure and monitor the switch from the CLI. Connect your management station to the 
switch console port or use Telnet from a remote management station. See the switch command 
reference on Cisco.com for information.

SNMP network management

You can manage switches from a Simple Network Management Protocol (SNMP)-compatible 
management station that is running platforms such as HP OpenView or SunNet Manager. The switch 
supports a comprehensive set of Management Information Base (MIB) extensions and four Remote 
Monitoring (RMON) groups. See the switch software configuration guide on Cisco.com and the 
documentation that came with your SNMP application for information.

See the switch software configuration guide on Cisco.com for an explanation of network configuration 
concepts. The software configuration guide also provides network configuration examples for creating 
dedicated network segments that are interconnected through Ethernet connections.