Cisco Systems IE 3010 Manual De Usuario
C-3
Cisco IE 3010 Switch Hardware Installation Guide
78-19581-02
Appendix C Configuring the Switch with the CLI Setup Program
Accessing the CLI Through the Console Port
USB Console Port
Step 1
If you are connecting the switch USB console port to a Windows-based PC for the first time, install a
USB driver. See
USB driver. See
•
•
•
Figure C-2
Connecting the USB Console Cable
Step 2
Connect an USB cable to the PC USB port. Connect the other end of the cable to the switch mini-B
(5-pin-connector) USB console port. See
(5-pin-connector) USB console port. See
.
Step 3
To identify the COM port assigned to the USB console port:
Choose Start > Control Panel > Systems
Click the Hardware tab and choose Device Manager. Expand the Ports section. The assigned COM
port appears in parenthesis at the end of the line with this entry: Cisco USB System Management
Console.
port appears in parenthesis at the end of the line with this entry: Cisco USB System Management
Console.
Step 4
Start the terminal-emulation program on the PC or the terminal. The program, frequently a PC
application such as HyperTerminal or ProcommPlus, makes communication possible between the switch
and your PC or terminal.
application such as HyperTerminal or ProcommPlus, makes communication possible between the switch
and your PC or terminal.
1
USB console port
3
USB port on the PC
2
USB cable
208379
3
2
2
1
1
C isco IE 3010