Cisco Systems SPS224G4 Manual De Usuario
Clock Commands
show clock
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
117
6
To enable polling you should also use the sntp unicast client poll Global
Configuration mode command for global enabling.
Configuration mode command for global enabling.
Polling time is determined by the sntp client poll timer Global Configuration mode
command.
command.
Example
The following example configures the device to accept SNTP traffic from the
server on 192.1.1.1.
server on 192.1.1.1.
Console(config)# sntp server 192.1.1.1
show clock
The show clock Privileged EXEC mode command displays the time and date from
the system clock.
the system clock.
Syntax
show clock [detail]
Parameters
•
detail — Shows time zone and summertime configuration.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode