Cisco Systems SPS224G4 Manual De Usuario
11
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
147
DHCP Auto-configuration
ip dhcp autoconfig
To enable the support of auto configuration via DHCP option 67 field, use the ip
dhcp autoconfig global configuration command. To disable DHCP auto
configuration, use the no form of this command.
dhcp autoconfig global configuration command. To disable DHCP auto
configuration, use the no form of this command.
Syntax
ip dhcp autoconfig
no ip dhcp autoconfig
Command Mode
Global configuration
Default Configuration
By default the feature is enabled
Usage Guidelines
The command enables the support of auto-configuration via DHCP option 67 field.
The DHCP server should be provisioned with the configuration file URL in a TFTP
server. The configuration data is set to the device upon IP renewal (for example,
reboot) and once loaded the device would reset itself.
The DHCP server should be provisioned with the configuration file URL in a TFTP
server. The configuration data is set to the device upon IP renewal (for example,
reboot) and once loaded the device would reset itself.